From a787e9e682c5d600d65ecfc519ee7e14b500e825 Mon Sep 17 00:00:00 2001 From: igneum-labs <337424239+igneum-labs@users.noreply.github.com> Date: Tue, 6 Oct 2026 16:55:03 +0000 Subject: [PATCH] Ember: the re-point and the no-prompt proof in the plan and the bench log Co-Authored-By: Claude Fable 5.1 --- docs/bench-log.md | 6 ++++++ docs/plans/ember-tune.md | 14 ++++++++++++++ 2 files changed, 20 insertions(+) diff --git a/docs/bench-log.md b/docs/bench-log.md index d3670a441..e459ad466 100644 --- a/docs/bench-log.md +++ b/docs/bench-log.md @@ -2262,3 +2262,9 @@ acknowledged true" = the applied rule demanded watts from a card that reports of was read on every tick (amd_watts_source=engine_telemetry, 363 samples). The helper registered on the scratch copy (fixed 200362a: task_exe, the reregister verb). PC 1 mined through the installed app again by 16:44Z: 170.6 MH/s over the three cards, 0 faults. + +Re-point and proof, 16:48 to 16:53Z: the Power Helper task re-pointed by the helper itself ("1 reregister ok: the +task now runs ...Programs\Igneum Miner\igneum-app.exe --power-helper"), then the installed app's caps through the +task with no prompt ("-pl 460: set to 460.00 W from 575.00 W", "-pl 160: set to 160.00 W from 100.00 W"). Task +Running, Highest, user Admin. Cards: 5090 221 W at 1845 MHz, 4070 75.8 W at 1860 MHz, 9070 XT 202 W, all mining +through the installed app. Ember closed 16:53Z. diff --git a/docs/plans/ember-tune.md b/docs/plans/ember-tune.md index 5de75c53c..5b1398f7a 100644 --- a/docs/plans/ember-tune.md +++ b/docs/plans/ember-tune.md @@ -282,6 +282,20 @@ After the run (nvidia-smi, the engine gone, the installed miners not yet back): 170.6 MH/s, 0 faults (console, 16:44Z). The 9070 XT's ADLX state read "gmax 0 plimit 0 factory 0" (before: factory 1): zero offsets, the factory flag cleared by the engine's set of 0; the 3.0 coordinator's reset job puts it back. +### The re-point and the no-prompt proof (6 October 2026, 16:48 to 16:53Z) + +`ember-repoint-pc1-1` (unelevated): task action before = the scratch copy; kit-7 (bd7fcf4) put in its place; +`Start-ScheduledTask`; `1 reregister` written; helper.log at 16:48:42Z: "1 reregister ok: the task now runs +C:\Users\Admin\AppData\Local\Programs\Igneum Miner\igneum-app.exe --power-helper"; action read back = the +installed exe. Three seconds later the installed app's own caps went through the task with no prompt (helper.log: +"nvidia-smi -i 0 -pl 460: Power limit for GPU 01:00.0 was set to 460.00 W from 575.00 W"; "-i 1 -pl 160: set to +160.00 W from 100.00 W"). `ember-proof-pc1-2` (reads only): task state Running, run level Highest, user Admin; +5090 221 W at 1845 MHz, 4070 75.8 W at 1860 MHz, 9070 XT 202 W; all three mining through the installed app. The +Security log's process-start audit is off on PC 1, so a consent.exe count is unreadable; the helper's log is the +record. Known in 0.3.13 on PC 1 until 0.3.14: the rows show the app's own earlier baseline (no /api/tune-progress +to receive the run's result), and the 80% caps are the app's setting; the draw is the tuned one regardless because +the driver holds the clock locks and the caps do not bind. + ## 8a. Next-cut notes (for the 0.3.12 shipper) For the 0.3.14 cut (6 October 2026, after run 6), on ember-tune: